全氟烷氧基 (PFA) NEOFLON PFA AP210-东莞市苏广塑胶原料有限公司

P 产品展厅RODUCT

全氟烷氧基 (PFA) NEOFLON PFA AP210

品牌：AP210

货号：AP-230

价格： ￥450/千克
发布日期： 2023-10-19
更新日期： 2025-11-01

产品详请

品牌	AP210
货号	AP-230
用途	配件
牌号	AP210
型号	AP210
品名	工程塑料原料
外形尺寸	AP210
生产企业	AP-230
是否进口	否

全氟烷氧基 (PFA) NEOFLON PFA AP210

物理性能	额定值	单位制	测试方法
密度 / 比重	2.14	g/cm3	ASTM D792
熔流率（熔体流动速率） (372°C/5.0 kg)	14	g/10 min	ASTM D3307

机械性能
额定值

单位制

测试方法

抗张强度
31.0

MPa
ASTM D1708

伸长率 (断裂)
420

%
ASTM D1708

热性能
额定值

单位制

测试方法

连续使用温度
260

°C

熔融温度
306

°C
DSC

NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.

Introduction

AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.

Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.

Excellent chemical resistance which is not affected by most of the chemicals.

Excellent heat resistance. Continuous use temperature is 260°C.

It retains flexibility without losing toughness under the environment from cryogenic to high temperature.

Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.

It shows high electrical resistance and dielectric strength.

Nonflammable like POLYFLON PTFE and NEOFLON FEP.

Excellent weather resistance. No properties change even when exposed outside for a long time.

Non-stickiness. It shows excellent releasability and water repellency / oil repellency.

机械性能	额定值	单位制	测试方法
抗张强度	31.0	MPa	ASTM D1708
伸长率 (断裂)	420	%	ASTM D1708

热性能	额定值	单位制	测试方法
连续使用温度	260	°C
熔融温度	306	°C	DSC