P
产品目录
RODUCT
- PA46 新型聚酰胺树脂
- PC-聚碳酸酯原料
- PA6-聚酰胺6或尼龙6原料
- PA66-聚酰胺66或尼龙66原料
- ABS树脂
- PPE+PS/PPO/聚苯醚树脂
- PC+PBT 塑胶
- POM-聚甲醛
- PBT-聚酯系列
- TPU-聚氨酯弹性体 聚酯型 聚醚
- PA12-尼龙12原料
- PEI PES PSU PPSU
- LCP/PA6T/9T高温原料
- 热熔胶
- TPE/TPEE原料
- 通用塑料
- 塑料合金
- PPS(聚苯硫醚)
- UHMWPE-超高分子量聚乙烯
- 铁氟龙/氟塑料
- 热塑性弹性体
- PC/PET
- PPA
- COC
- PA4T
- PARA/IXEF
- PEEK
- PPSU PSU
- PVC
- 电木粉
- PETG PCTG
- POK
- TPX
- PET
P
产品展厅
RODUCTS
PA2200 Top Quality 1.0 EOS GmbH
物品单位 | 价格 | 品牌 |
---|---|---|
千克 | 223 | PA 2200 Top Quality 1.0 |
- 货号:RXT85A
- 发布日期: 2023-04-19
- 更新日期: 2023-06-07
产品详细说明
品牌 | PA 2200 Top Quality 1.0 |
货号 | RXT85A |
牌号 | PA 2200 Top Quality 1.0 |
型号 | PA 2200 Top Quality 1.0 |
品名 | PA12 |
外形尺寸 | RxT90A |
产品用途 | 配件 |
生产企业 | RxT90A |
是否进口 | 否 |
PA2200 Top Quality 1.0 EOS GmbH
产品说明:
This whitish fine powder PA 2200 on the basis of polyamide 12 serves with its very well-balanced property profile a wide variety of applications. Laser-sintered parts made from PA 2200 possess excellent material properties:
Typical applications of the material are fully functional plastic parts of highest quality. Due to the excellent mechanical properties the material is often used to substitute typical injection moulding plastics. The biocompatibility allows its use e.g. for prostheses, the high abrasion resistance allows e.g. the realisation of movable part connections.
60 μm layer thickness:
The parameter set TopQuality is used for very small to medium-sized parts with extremely fine, fragile geometries and geometric elements and the strictest requirements in surface quality are best served by this parameter set. It applies a layer thickness of 60 μm, which is approximately the thickness of a grain of the plastic powder normally used today. The typical stair-step effect on upward and downward-pointing geometry elements can practically no longer be seen on TopQuality parts. The mechanical attributes of TopQuality parts are satisfyingly close to the levels of Performance parts.
- high strength and stiffness
- good chemical resistance
- excellent long-term constant behaviour
- high selectivity and detail resolution
- various finishing possibilities (e.g. metallisation, stove enamelling, vibratory grinding, tub colouring, bonding, powder coating, flocking)
- bio compatible according to EN ISO 10993-1 and USP/level VI/121 °C
- approved for food contact in compliance with the EU Plastics Directive 2002/72/EC (exception: high alcoholic foodstuff)
Typical applications of the material are fully functional plastic parts of highest quality. Due to the excellent mechanical properties the material is often used to substitute typical injection moulding plastics. The biocompatibility allows its use e.g. for prostheses, the high abrasion resistance allows e.g. the realisation of movable part connections.
60 μm layer thickness:
The parameter set TopQuality is used for very small to medium-sized parts with extremely fine, fragile geometries and geometric elements and the strictest requirements in surface quality are best served by this parameter set. It applies a layer thickness of 60 μm, which is approximately the thickness of a grain of the plastic powder normally used today. The typical stair-step effect on upward and downward-pointing geometry elements can practically no longer be seen on TopQuality parts. The mechanical attributes of TopQuality parts are satisfyingly close to the levels of Performance parts.
物性信息:
基本信息 | |
---|---|
特性 |
|
用途 |
|
机构评级 |
|
外观 |
|
形式 |
|
加工方法 |
|