Polyurethane 1100-80A PolyBlend-东莞市苏广塑胶原料有限公司

P 产品展厅RODUCT

Polyurethane 1100-80A PolyBlend

品牌：1100-75A

货号：200

价格： ￥62/千克
发布日期： 2023-04-03
更新日期： 2025-05-12

产品详请

品牌	1100-75A
货号	200
用途	配件
牌号	1100-75A
型号	1100-75A
品名	TPU
包装规格
外形尺寸	1100-75A
生产企业	1100-75A
是否进口	否

olyBlend™ 1100-45A北美洲PolyBlend is a family of exceptionally soft, aroma...PolyBlend™ 1100-55A北美洲PolyBlend is a family of exceptionally soft, aroma...PolyBlend™ 1100-80A北美洲PolyBlend is a family of exceptionally soft, aroma...Polyurethane 1100-80A PolyBlend

PolyBlend™ 1100 80A is a Polyurethane material. It is available in North America for extrusion or injection molding.

Important attributes of PolyBlend™ 1100 80A are:

High Strength

Plasticized

PolyBlend is a family of exceptionally soft, aromatic polyurethane elastomeric alloys, which can be used as a substitute for natural rubber or latex in many applications.

These polymers encompass unique characteristics such as low flexural modulus, moderate tensile strength, and high elongation, in addition to allowing for a high draw-down ratio due to its superior melt strength and chemical integrity.

PolyBlend can be processed on conventional extrusion or injection molding equipment and is available in hardnesses ranging from 45 Shore A to 80 Shore A.

AdvanSource Biomaterials synthesizes and manufactures medical grade materials offering the ability to tailor physical and mechanical characteristics to support and enhance your end product design.

These mechanical characteristic's, critical to the design and development of medical devices, can incorporate a wide range of physical and chemical properties while maintaining core characteristics such as biodurability and biocompatibility. In most materials, specialized characteristics such as the addition of colorant agents or antimicrobial properties (where applicable) can be added to the polymer to provide a homogenous material and limit secondary processing steps.

In addition, radiopaque agents may also be incorporated into the formula to provide additional product enhancements and may contain up to 40%, by weight, of a radiopaque agent thus allowing varied-scale visibility options.

With an expanding range of secondary operations including custom solution development, prototype coating capabilities, and project management services, ASB's expert team of chemists, scientists, engineers and industry professionals assist in every stage of customers' projects, from concept initiation through full-scale manufacture.

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	75		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
Strain	2.90	MPa
300% Strain	5.03	MPa
Tensile Strength (Yield)	22.4	MPa	ASTM D412
Tensile Elongation (Yield)	580	%	ASTM D412
Tear Strength 1	42.0	kN/m	ASTM D624

Additional Information
Tensile Modulus, ASTM D412-61T: 400 psi

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	202	°C
Cylinder Zone 2 Temp.	207	°C
Cylinder Zone 3 Temp.	213	°C
Melt Temperature	213	°C
Die Temperature	210	°C
Screw L/D Ratio	24.0:1.0