DuPont Fluoropolymers PFA 416HP
  • 品牌:416HP
  • 货号:200
  • 价格: ¥450/千克
  • 发布日期: 2022-09-28
  • 更新日期: 2024-06-14
品牌 416HP
货号 200
用途 配件
牌号 416HP
型号 416HP
品名 氟塑料
外形尺寸 100
生产企业 350

DuPont Fluoropolymers PFA 416HP 

For inventory control purposes product name may be followed by an X.
Products labeled PFA 416 HP and PFA 416 HP X are equivalent and all information in this document is applicable to both.
Typical Application
Applications for DuPont™ Teflon ® PFA 416HP include high performance thin-wall wire coatings; intricate injection molded parts for production of chemicals where purity in the parts-per-billion range is needed; semiconductor components and electronic parts; and fluid handling systems for high performance chemical filters. With a typical melt flow rate of 42, Teflon ® PFA 416HP resin is ideally suited for applications requiring a high processing speed and very low viscosity.
DuPont™ Teflon ® PFA 416HP is a special purpose fluoroplastic resin available in pellet form. This resin has a higher melt flow rate (typical MFR of 42) than most other PFA fluoroplastic resins, which permits higher extrusion speed and easier processing, making Teflon ® PFA 416HP a cost-effective alternative for producing thin-wall and complicated articles. Unlike other high melt flow rate polymers, Teflon ® PFA 416HP is specially formulated to provide a high melt flow rate for processing ease, while still providing good flexural properties and stress-crack resistance. These unique properties, coupled with the resin's high thermal stability, enable thin coatings of ultra-fine wires and injection molding of complex parts. Table 1 shows the typical property data for Teflon ® PFA 416HP.
The enhanced purity of Teflon ® PFA 416HP makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. Teflon ® PFA 416HP contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Teflon ® PFA 416HP combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® PFA 416HP can be used to improve processing rates, and allows intricate electronics to be insulated with an extremely thin coating and still withstand soldering.
Properly processed products made from neat Teflon ® PFA 416HP resin provide the superior properties typical of the fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.
In a flame situation, products of Teflon ® PFA 416HP resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ® PFA 416HP meets the requirements of ASTM D3307, Type IX
  • 纯度高
  • 低摩擦系数
  • 低吸湿性
  • 低烟度
  • 良好的电气性能
  • 良好的熔体强度
  • 良好的柔韧性
  • 流动性高
  • 耐化学性良好
  • 耐气候影响性能良好
  • 耐热性,中等
  • 热稳定性,良好
  • 韧性良好
  • 食品接触的合规性
  • 半导体模制化合物
  • 薄质涂料
  • 电气元件
  • 过滤器
  • 液体处理
  • FDA 21 CFR 177.1550
  • 欧洲 No 10/2011
  • 粒子
  • 挤出
  • 树脂传递成型
  • 压缩模塑
  • 注射成型
物理性能 额定值 单位制 测试方法
比重 2.14 g/cm3 ASTM D792
熔流率(熔体流动速率) (372°C/5.0 kg) 42 g/10 min ASTM D3307, ISO 12086
吸水率 (24 hr) < 0.030 % ASTM D570
硬度 额定值 单位制 测试方法
肖氏硬度 (邵氏 D) 55 ASTM D2240, ISO 868
机械性能 额定值 单位制 测试方法
抗张强度 (23°C) 25.0 MPa ASTM D3307, ISO 12086
伸长率 (断裂, 23°C) 350 % ASTM D3307, ISO 12086
弯曲模量 (23°C) 690 MPa ASTM D790, ISO 178
热性能 额定值 单位制 测试方法
熔融温度 305 °C ASTM D4591
电气性能 额定值 单位制 测试方法
体积电阻率 1.0E+18 ohms·cm ASTM D257, ISO 1325
    0.250 mm 1 80 kV/mm ASTM D149
    0.250 mm 80 kV/mm IEC 60243-1
介电常数 (1 MHz) 2.03 ASTM D150, IEC 60250
耗散因数 (1 MHz) < 2.0E-4 ASTM D150, IEC 60250
可燃性 额定值 单位制 测试方法
UL 阻燃等级 2 V-0 UL 94
极限氧指数 > 95 % ASTM D2863, ISO 4589-2
补充信息 额定值 单位制 测试方法
Critical Shear Rate (372°C) 12.0 sec^-1
MIT Folding Endurance 3(200.0 μm) 4.0E+3 Cycles ASTM D2176
Weather and Chemical Resistance: Outstanding


● 使用温度在290℃。