|
| 品牌 | TW341 BK |
| 货号 | 100 |
| 用途 | 配件 |
| 牌号 | TW341 BK |
| 型号 | TW341 BK |
| 品名 | 其它工程塑料 |
| 包装规格 | 25kg |
| 外形尺寸 | 25kg |
| 生产企业 | TW341 BK(荷兰恩骅力PA46) |
| 是否进口 | 是 |
黑色 TW341 BK
现货樟木头：优价出原包装荷兰DSM PA46原料：
PA46 TE373 NAT---------纯树脂，热稳定，摩擦磨耗改良
PA46 TW200F3 NAT------15%玻纤增强，热稳定
PA46 TW200F6 BK/NAT--30%玻纤增强，热稳定
PA46 TW200F8 BK-------40%玻纤增强，热稳定
PA46 TW271F6 NAT-----30%玻纤增强，热稳定，PTFE摩擦改良
PA46 TW271F6 NAT-----40%玻纤增强，热稳定，PTFE摩擦改良
PA46 TW278F10 NAT-----50%玻纤增强，热稳定，低摩擦系数, 耐磨损性良好
PA46 HF5050 BK----------50%玻纤增强，热稳定,流动性高,阻燃。
PA46 HF5040 BK----------40%玻纤增强，热稳定,流动性高,阻燃
PA46 TW241F3 NAT-----15%玻纤增强，热稳定
PA46 TW241F6 NAT-----30%玻纤增强，热稳定
PA46 TW241F10 NAT/BK---50%玻纤增强，热稳定
PA46 TW241F12 NAT-------60%玻纤增强，热稳定
PA46 TS300 BK---------------纯树脂、热稳定、润滑，耐高温
PA46 TS341 BK/NAT---------纯树脂、热稳定、润滑，耐高温
PA46 TS200F6 BK-------------30%玻纤增强，热稳定
PA46 TC551 NAT--------导热、热稳定
PA46 MC50 BK----------35%玻纤增强，无卤阻燃，磷含量，低（到无）
PA66 GS-51 NAT---------玻璃纤维增强，二硫化钼增强PA66
PA4T K11 BK------30%玻纤增强，热稳定,耐高温305度
PA4T F12 BK-------40%玻纤增强，热稳定, 无卤阻燃
订购电话：139 2297 9590 李先生
| | ||
| | | |
| 微粒含量(Fines Content) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
| 总交换容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
| PH范围 (pH Range) | 0 to 14 | 0 to 14 |
| 允许温度 (Temp. Stability) | 120°C | 60°C |
| 微粒含量(Fines Content) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
| 总交换容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
| PH范围 (pH Range) | 0 to 14 | 0 to 14 |
| 允许温度 (Temp. Stability) | 120°C | 60°C |
| 溶解率 (Solubility) | Insoluble in all common solvents | Insoluble in all common solvents |
| 溶出有机物(Organic leachable) | Less than 0.2 mg KMNO4 per ml of wet resin | Less than 0.2 mg KMNO4 per ml of wet resin |
| 密度Backwash settled density | Approx.750 gm/liter | Approx.750 gm/liter |
| 不纯物(Impurities) | Fe=50 ppm(max) | Fe=50 ppm(max) |
| | Cu=50 ppm(max) | Cu=50 ppm(max) |
| | Pb=50 ppm(max) | Pb=50 ppm(max) |
| 球粒强度(Bead strength) | Avg. not less than 300g/bead by Chatillon test (ASTM Standard) | |
