|
| 品牌 | TS341 BK |
| 货号 | 100 |
| 用途 | 配件 |
| 牌号 | TS341 BK |
| 型号 | TS341 BK |
| 品名 | 其它工程塑料 |
| 包装规格 | 25kg |
| 外形尺寸 | 25kg |
| 生产企业 | TS341 BK |
| 是否进口 | 是 |
TS341 BK 黑色纯树脂 热稳定 黑色润滑，耐高温
现货樟木头：优价出原包装荷兰DSM PA46原料：
PA46 TE373 NAT---------纯树脂，热稳定，摩擦磨耗改良
PA46 TW200F3 NAT------15%玻纤增强，热稳定
PA46 TW200F6 BK/NAT--30%玻纤增强，热稳定
PA46 TW200F8 BK-------40%玻纤增强，热稳定
PA46 TS200F6 BK-------------30%玻纤增强，热稳定
PA46 TW441 NAT---------纯树脂、高粘度、热稳定、润滑
PA46 TW341 BK/NAT---------纯树脂、高粘度、热稳定、润滑
PA46 TW363 NAT---------增韧纯树脂、高粘度、热稳定、润滑
A46 TE200F6 NAT--------30%玻纤增强、热稳定
PA46 TE250F3 NAT--------15%玻纤增强、热稳定、阻燃
PA46 TE250F6 BK/NAT--------30%玻纤增强、热稳定、阻燃
PA46 TE250F9 NAT--------45%玻纤增强、热稳定、阻燃
PA46 TC502 NAT--------导热、热稳定
PA46 TC551 NAT--------导热、热稳定
PA4T F12 BK-------40%玻纤增强，热稳定, 无卤阻燃
订购电话：139 2297 9590 李先生
| | | |
| 粒径范围(U.S.mesh in wet) | 16 to 50 | 16 to 50 |
| 粒度范围 (Particle Size) | 0.3 to 1.2 mm | 0.3 to 1.2 mm |
| 微粒含量(Fines Content) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
| 总交换容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
| PH范围 (pH Range) | 0 to 14 | 0 to 14 |
| 允许温度 (Temp. Stability) | 120°C | 60°C |
| 微粒含量(Fines Content) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) | 穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
| 总交换容量 (Total Exch. Capacity) | 1.8 meq/ml minimum of 99% in hydrogen form | 1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
| PH范围 (pH Range) | 0 to 14 | 0 to 14 |
| 允许温度 (Temp. Stability) | 120°C | 60°C |
| 溶解率 (Solubility) | Insoluble in all common solvents | Insoluble in all common solvents |
| 溶出有机物(Organic leachable) | Less than 0.2 mg KMNO4 per ml of wet resin | Less than 0.2 mg KMNO4 per ml of wet resin |
| 密度Backwash settled density | Approx.750 gm/liter | Approx.750 gm/liter |
| 不纯物(Impurities) | Fe=50 ppm(max) | Fe=50 ppm(max) |
| | Cu=50 ppm(max) | Cu=50 ppm(max) |
| | Pb=50 ppm(max) | Pb=50 ppm(max) |
| 球粒强度(Bead strength) | Avg. not less than 300g/bead by Chatillon test (ASTM Standard) | |
