| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 |
| 物理性能 | 密度(23°C) | | ISO1183 | 1.47 | g/cm3 |
| 表观密度 | | ISO60 | 0.80 | g/cm3 |
| 溶化体积流率（MVR）(260°C/2.16kg) | | ISO1133 | 15.0 | cm3/10min |
| 收缩率 | 横向流量:270°C,2.00mm2 | ISO294-4 | 1.0 | % |
| AcrossFlow:120°C,2hr,2.00mm3 | ISO294-4 | 0.20 | % |
| 流量:270°C,2.00mm2 | ISO294-4 | 0.40 | % |
| Flow:120°C,2hr,2.00mm3 | ISO294-4 | 0.10 | % |
| 吸水率(饱和,23°C) | | ISO62 | 0.40 | % |
| 吸水率(平衡,23°C,50%RH) | | ISO62 | 0.20 | % |
| ViscosityNumber(ReducedViscosity) | | ISO1628 | 92.0 | ml/g |
| 机械性能 | 拉伸模量(23°C) | | ISO527-2/1 | 7500 | MPa |
| 拉伸应力(断裂,23°C) | | ISO527-2/5 | 120 | MPa |
| 拉伸应变(断裂,23°C) | | ISO527-2/5 | 3.2 | % |
| TensileCreepModulus(1hr) | | ISO899-1 | 7200 | MPa |
| 拉伸蠕变模量(1000hr) | | ISO899-1 | 6100 | MPa |
| 弯曲模量4(23°C) | | ISO178/A | 7500 | MPa |
| 弯曲应力4 | 3.5%Strain | ISO178/A | 195 | MPa |
| 23°C | ISO178 | 195 | MPa |
| FlexuralStrainatFlexuralStrength5(23°C) | | 3.5 | % |
| 冲击性能 | 简支梁缺口冲击强度 | -30°C | ISO179/1eA | <10 | kJ/m2 |
| 23°C | ISO179/1eA | <10 | kJ/m2 |
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 35 | kJ/m2 |
| 23°C | ISO179/1eU | 40 | kJ/m2 |
| 悬壁梁缺口冲击强度 | -40°C | ISO180/1A | <10 | kJ/m2 |
| -30°C | ISO180/1A | <10 | kJ/m2 |
| 23°C | ISO180/1A | <10 | kJ/m2 |
| 无缺口伊佐德冲击强度 | -30°C | ISO180/1U | 35 | kJ/m2 |
| 23°C | ISO180/1U | 35 | kJ/m2 |
| 硬度 | 球压硬度 | | ISO2039-1 | 175 | MPa |
| 热性能 | 热变形温度(0.45MPa,未退火) | | ISO75-2/B | 220 | °C |
| 热变形温度(1.8MPa,未退火) | | ISO75-2/A | 195 | °C |
| 维卡软化温度 | | ISO306/B120 | 210 | °C |
| BallPressureTest(215°C) | | IEC60695-10-2 | Pass | |
| 熔融温度5 | | ISO11357-3 | 225to250 | °C |
| 线形热膨胀系数-流动(23到55°C) | | ISO11359-2 | 3.0E-5 | cm/cm/°C |
| CLTE-Transverse(23to55°C) | | ISO11359-2 | 9.0E-5 | cm/cm/°C |
| 导热系数(23°C) | | ISO8302 | 0.26 | W/m/K |
| HalvingInterval | --7 | IEC60216 | 10.2 | °C |
| 1.50mm8 | IEC60216 | 13.5 | °C |
| 1.50mm9 | IEC60216 | 10.2 | °C |
| TemperatureIndex10 | 介电强度 | IEC60216 | 150 | |
| TensileImpactStrength:1.50mm | IEC60216 | 130 | |
| TensileStrength:1.50mm | IEC60216 | 150 | |
| 电气性能 | 表面电阻率 | | IEC60093 | >1.0E+15 | ohms |
| 体积电阻率(23°C) | | IEC60093 | >1.0E+15 | ohms·cm |
| 介电强度(23°C,1.00mm) | | IEC60243-1 | 24 | kV/mm |
| 相对电容率 | 23°C,100Hz | IEC60250 | 3.80 | |
| 23°C,1MHz | IEC60250 | 3.60 | |
| 耗散因数 | 23°C,100Hz | IEC60250 | 1.8E-3 | |
| 23°C,1MHz | IEC60250 | 0.017 | |
| 漏电起痕指数(解决方案A) | | IEC60112 | 250 | V |
| 可燃性 | UL阻燃等级 | 0.8mm | UL94 | HB | |
| 1.6mm | UL94 | HB | |
| 灼热丝易燃指数(2.0mm) | | IEC60695-2-12 | 750 | °C |
| 极限氧指数11 | | ISO4589-2 | 21 | % |
| ADDITIONAL INFORMATION | 补充信息 | | TestMethod | NominalValue | Unit |
| ElectrolyticalCorrosion | | IEC60426 | A1 | |
| ISOShortname | | ISO7792 | PBT+PET,GHLMR,09-070,GF20 |
