东莞市苏广塑胶原料有限公司
您当前的位置: 网站首页 > 产品展厅 >PEI PES PSU PPSU >R-7159 Precolored Resins Radel 索尔维PPSU
P 产品展厅RODUCT
R-7159 Precolored Resins Radel 索尔维PPSU
  • 英文名称:R-7159 Precolored Resins Radel 索尔维PPSU
  • 品牌:Precolored
  • 产地:索尔维
  • 型号:25kg
  • 货号:Precolored
  • 价格: ¥30/千克
  • 发布日期: 2018-06-07
  • 更新日期: 2025-05-05
产品详请
品牌 Precolored
货号 Precolored
用途 配件
牌号 R-7159
型号 Precolored
品名 R-7159 Precolored Resins Radel 索尔维PPSU
包装规格 25kg
外形尺寸 25kg
生产企业 Precolored
是否进口

产品说明:
Radel® R-7159 polyphenylsulfone (PPSU) was developed specifically for aircraft interior applications. The product complies with the FAA regulation 14CFR Part 25 Appendix F, offering vertical burn resistance, very low smoke generation and, through the use of proprietary additives, low heat release values in the Ohio State University (OSU) rate of heat release method. It also generates low flaming-mode toxic gas emissions.
This resin offers good resistance to most fluids found in the aviation industry and is available in a natural color that is designed to accept aircraft paint systems for aesthetic parts. The painting function enhances the chemical resistance of the polymer and provides the final step in color coordination.
  • Natural: Radel® R-7159 NT 50
物性信息:
基本信息
特性
  • 低烟度
  • 毒性低
  • 良好的加工稳定性
  • 流动性高
  • 耐洗涤剂
  • 韧性良好
  • 阻燃性
用途
  • 飞机内饰
  • 飞机应用
  • 航空航天应用
机构评级
  • FAA FAR 25.853a
  • FAA FAR 25.853d
  • OSU 55/55
RoHS 合规性
  • RoHS 合规
外观
  • 自然色
形式
  • 粒子
加工方法
  • 注射成型
物理性能 额定值 单位制 测试方法
比重 1.35 g/cm3 ASTM D792
熔流率(熔体流动速率) (380°C/2.16 kg) 22 g/10 min ASTM D1238
机械性能 额定值 单位制 测试方法
拉伸模量 2280 MPa ASTM D638
抗张强度 (屈服) 74.5 MPa ASTM D638
伸长率 (断裂) 30 到 50 % ASTM D638
弯曲模量 2480 MPa ASTM D790
弯曲强度 101 MPa ASTM D790
冲击性能 额定值 单位制 测试方法
悬壁梁缺口冲击强度 130 J/m ASTM D256
热性能 额定值 单位制 测试方法
载荷下热变形温度 (1.8 MPa, 未退火) 200 °C ASTM D648
可燃性 额定值 单位制 测试方法
OSU峰值放热速率 1 kW/m2 FAR 25, AppF
OSU总放热量 - 2分钟 2 kW·min/m2 FAR 25, AppF
垂直燃烧-60秒 3 FAR 25, AppF
    滴液燃烧时间 无滴漏 FAR 25, AppF
    燃烧时间 0.0 hr FAR 25, AppF
    长度 cm FAR 25, AppF
毒气排放 4 BSS 7239/ATS 1000/ABD 0031
    CO ppm BSS 7239/ATS 1000/ABD 0031
    HCL ppm BSS 7239/ATS 1000/ABD 0031
    HCN ppm BSS 7239/ATS 1000/ABD 0031
    HF ppm BSS 7239/ATS 1000/ABD 0031
    NO+NO2 ppm BSS 7239/ATS 1000/ABD 0031
    SO2 ppm BSS 7239/ATS 1000/ABD 0031
烟雾密度 - Dmax,4 分钟 5 Ds FAR 25, AppF

注射 额定值 单位制
干燥温度 149 到 177 °C
干燥时间 4.0 hr
料筒后部温度 354 到 371 °C
料筒中部温度 360 到 377 °C
料筒前部温度 366 到 382 °C
射嘴温度 360 到 377 °C
加工(熔体)温度 366 到 388 °C
模具温度 107 到 163 °C
注射速度 快速
螺杆压缩比 2.0 : 1.0 到 3.0 : 1.0

联系方式
手机:13922979590
手机访问官网